GP12200 csb battery 12V20Ah Suitable for Backup power for security alarm control panels, Evacuation indication devices and emergency lighting fixtures
Designed for float standby applications, the CSB GP12200 uses AGM valve-regulated sealed lead-acid technology and is part of the GP series, with a 12V 20Ah rating; it can be used in security, emergency lighting, and medical equipment applications, with a design life of up to 5 years.
Taobao store
WeChat procurement
Product Features
- VRLA (valve-regulated lead-acid) battery
- Maintenance-free design with AGM absorbent glass mat separator technology, achieving gas recombination efficiency up to 99%
- Pure lead construction with proprietary elements
- Specifically designed for float-charge standby power applications
- Manufactured according to IEC 61056-1/2:2012 and recognized under UL1989 (MH14533)
Application Scenarios
- Backup power for security alarm control panels
- Evacuation indication devices and emergency lighting fixtures
- Backup power for medical monitors and infusion pumps
- Building intercom systems and access control
- Linkage control panels and fire alarm control panels
- Testing equipment and small electronic instruments
Product parameters
- Model:GP12200
- Voltage:12 Vdc
- Nominal Capacity:20 Ah @20hr-rate
- Ah Capacity:20.56 (8-Hr 1.75 VPC @ 25°C)
- Ah Capacity:22.60 (20-Hr 1.75 VPC @ 25°C)
- Ah Capacity:20.24 (8-Hr 1.80 VPC @ 25°C)
- Max. Charge Current:6.00 A
- Max. Discharge Current:230 A
- Short Circuit Current:559 A
- Internal Resistance:16.1 mΩ
- Terminal Type:I1 thread lead alloy terminal to accept M5 bolt
- Terminal Torque:30.4±6.1 Kgf·cm / 3.0±0.6 N·m 26.4±5.3 Lbf·in
- Container Material:ABS (UL 94-HB) standard, flame-retardant (94-V0) available upon request
- Weight:5.80 / 14.11 kg / lb.
- Length (L):181.0±2.0 mm 7.12±0.08 inch
- Width (W):76.0±1.0 mm 3.00±0.04 inch
- Height (H):165.0±2.0 mm 6.50±0.08 inch
- Design Life:Up to 5 years in standby service at 25°C; Eurobat (20°C): 3-5 years, Standard Commercial
- Float Charging Voltage:13.5 - 13.8 Vdc/battery
- Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
- Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C
Product details
The GP series is officially positioned as a general-purpose VRLA battery series and can be used in a variety of applications such as security, emergency lighting, and medical equipment. The CSB GP12200 belongs to this series and is a general-purpose valve-regulated sealed lead-acid battery with a rated voltage of 12 Vdc and a nominal capacity of 20 Ah (20hr-rate, 1.75 VPC @25°C). It is intended for float standby power applications and uses a valve-regulated sealed construction and absorbed glass mat technology, with gas recombination efficiency of up to 99%, and a maintenance-free design. The GP12200 also uses a pure lead construction and proprietary formulation, so it can be used as a backup power source in the above scenarios.
At 25°C, the capacities are: 20.56 Ah at the 8-hour rate to 1.75 VPC, 22.60 Ah at the 20-hour rate to 1.75 VPC, and 20.24 Ah at the 8-hour rate to 1.80 VPC.
Electrical parameters include a maximum charge current of 6.00 A, maximum discharge current of 230 A, short-circuit current of 559 A, and internal resistance of 16.1 mΩ; at 25°C, the float charge voltage is 13.5 to 13.8 Vdc/battery, and the equalization charge voltage is 14.4 to 15.0 Vdc/battery. Self-discharge performance: after 90 days of storage at 25°C, the remaining capacity is above 90%, and storage for up to 6 months is possible; a full charge is required before use; if the storage temperature is above 25°C, supplementary charging should be performed sooner.
Length, width, and height are 181.0±2.0 mm, 76.0±1.0 mm, and 165.0±2.0 mm respectively, and the weight is 5.80 kg (14.11 lb). The I1 threaded lead-alloy terminal accepts M5 bolts, and the terminal torque is 30.4±6.1 Kgf∙cm, which is 3.0±0.6 N∙m or 26.4±5.3 Lbf∙in. The case material is ABS (UL 94-HB), and a flame-retardant 94-V0 version is also available upon request.
Temperature adaptability: nominal temperature 25°C (77°F); discharge can be performed from -15°C to 50°C (5°F to 122°F), and charging and storage can be performed from -15°C to 40°C (5°F to 104°F). For float standby service at 25°C, the design life is up to 5 years; the Eurobat (20°C) standard commercial life is 3 to 5 years. Manufactured in compliance with IEC 61056-1/2:2012 and recognized by UL1989 (MH14533).